Security - Ansel 2615 Guía De Usuario

4.10.6 Security

You can configure wireless security such as WEP or WPA WPA encryption on this screen.
Note: It is recommended that you use WPA encryption over WEP if your wireless clients support
WPA. All of the wireless clients must use the same security settings in order to connect to the router.
Security Mode：you can select one mode as below.
WPA
To enable WPA, select WPA-PSK,WPA; WPA2-PSK,WPA2, WPA/WPA2-PSK,WPA/WPA2 from
the Security Mode.
WPA G-Rekey IntervalEnter the desired key renewal time in seconds.
WPA Data EncryptionSelect either TKIP, AES, TKIP/AES as the encryption method.
89