Philips SJA9191/17 Manual De Utilizador página 14

EN Getting Started
flashes slowly to indicate when you have new
calls.
You may review the call log while in standby
mode or in REVIEW CALLS mode. Simply push
one of the REVIEW keys to scroll through each
call record – the Caller ID information is dis-
played on the screen, and if you are in REVIEW
CALLS mode the date, time, and phone num-
ber are announced. If you push the reverse
REVIEW Key you will scroll from the last call
received backwards to the oldest call in the call
log. If you push the forward REVIEW key you
will scroll beginning with the oldest call in the
log to the last one. If you hold down either
review key for more than 2-seconds, the unit
will announce the number of new calls in the
call log followed by the date, time, and phone
number of each call.
You can clear a call by pressing the CLEAR key
while the call is displayed on the screen.
Holding down the CLEAR key for 2-seconds
clears all the calls from the call log.
Entering a Telephone Number Manually
Do you need to enter a number manually? You
can record names and outgoing messages for
any number that is already stored in the call log,
or stored in the list of calls with recorded
names or messages. If the number you want is
not already stored in memory, you can enter it
14