Philips SJA9191/17 Manual De Utilizador página 19

EN
Getting Started
displayed on the screen, pick up the phone like
you normally do to make a call, but instead of
dialing, press the MODE/DIAL key on the
Caller ID unit. If you're placing a call that
requires dialing only 7-digits, press the
MODE/DIAL key again to complete the call. If
10-digit or 1+10-digit dialing is necessary to
place the call, use the REVIEW keys to select
the appropriate dialing method, then press the
MODE/DIAL key to complete the call.
Message Waiting Notification
Your VoiceAnnounce ® Caller ID will alert you
if you have voice mail messages. This requires
a special service from your local telephone
company. The unit will detect both FSK and
stuttered dialtone (SDT) message notification
signals. When message waiting is detected, the
unit displays a message waiting icon on the
LCD, and will flash its LED fast. You can
choose to have an audible notification (beep
every minute) by selecting the MSG WAIT
BEEP option in the custom setup options.
Custom Setup Options
You can customize the way your
VoiceAnnounce ® Caller ID works. Hold down
the MODE key and momentarily press the
RECORD key to enter SETUP MODE. You
19