Installation - Philips SJA9191/17 Manual De Utilizador

Installation

Installation
Inside the VoiceAnnounce
age you will find the VoiceAnnounce
ID unit, users guide, a phone cord, and an
AC power adapter.
1. Connect the phone cord that extends
from the telephone jack on your wall to
the LINE jack on the back of the Caller ID
unit.
2. Use the supplied phone cord to connect
your telephone set to the PHONE jack on
the back of the Caller ID unit. (This also
applies if connecting the base of a cordless
phone.)
3. Use the included power adapter to power
the unit.
If your household experiences a power outage
the Caller ID unit will shut off without being
damaged. It will remember calls in the log,
recordings, and other settings, so you won't
have to re-program the unit when the power
comes back on. When the power is restored,
the Caller ID unit will be ready to screen calls.
® Caller ID pack-
Caller
®
EN
9