Fastening Your Child P; Assembly And Disassmbly Of The Belts P - Mutsy grow-up! Manual De Instrucciones

Fastening your child
· Always secure the Grow-up! onto a dining
chair first and ensure that the safety belts are
t ightened at the bottom and back side of the
chair (drawing 3 / B1, B2) as much as possi-
ble. Only then can the child be placed into the
Grow-up!
· The Grow-up! Booster Seat is fitted with a five-
point harness. Always check whether the straps
are in place as shown in drawing 2. Make sure
that both shoulder straps (drawing 2 / A1) are
attached in such a way that they cannot be
twisted.
! Always use the five-point harness.
· Position your child into the booster seat and
ensure that the middle strap is in between your
child's legs (drawing 1 / A3).
· Make sure that all of the straps on the five-
point harness (drawing 1 / A1, A2, A3) are ad-
justed to fit your child firmly and snugly.
· Close the safety five-point harness by clicking
the plastic buckles into position. (drawing 3 / A)
· The five-point harness can be adjusted by sli-
ding the adjusting mechanism over the straps
into the desired position.
· When your child is sitting in the Grow-up! and
has been fastened correctly, you can slide the
chair towards the table.
Assembly/Disassembly of the belts
· In order to disassemble the harness system,
loosen the connection belt (drawing 4 / D) by
releasing the 2 metal hooks.
! Always check whether all belts are correctly fit-
ted and tightly secured. Drawing 4 / A, B, C, D
shows the correct construction.
13
English