Publicidad
Grabar un número en la memoria DIRECTA
Descuelgue el auricular y oprima el botón STORE (grabar)
Oprima el botón de memoria DIRECT (directa) donde se quiera grabar el número (M1 ó M2)
Entre el número a grabar
Oprima el botón STORE (grabar) de nuevo para completar el proceso
Apunte los detalles del número grabado en la etiqueta situada debajo del auricular
Marcar un número usando la memoria DIRECTA
Descuelgue el auricular y espere al tono de llamada
Oprima el botón de memoria DIRECTA (M1 ó M2)
El número será marcado automáticamente
Grabar un número en la memoria INDIRECTA
Descuelgue el auricular y oprima el botón STORE (grabar)
Oprima el botón de memoria MEMORY
Oprima la tecla del 0 al 9 donde desee grabar el número
Entre el número a grabar
Oprima el botón STORE (grabar) de nuevo para completar el proceso
Apunte los detalles del número grabado en la etiqueta situada debajo del auricular
Marcar un número usando la memoria INDIRECTA
Descuelgue el auricular y espere al tono de llamada
Oprima el botón de memoria MEMORY
Oprima el número del 0 al 9 donde esté el numero grabado
El número será marcado automáticamente
Este producto cumple con las siguientes normas:
TBR37 (Requirements for pan-European connection to telephone networks)
TBR38 (Requirements for pan-European connection to telephone networks)
EN60950 1:2001
EN55022:1998 (EMC Emissions)
EN55024:1998 (EMC Immunity)
Para una copia de la declaración de la conformidad, escribe por favor a
Lazerbuilt Ltd, 20 Gunnels Wood Park, Stevenage, Herts, SG1 2BH
Fabricado en China por Lazerbuilt Ltd (www.lazerbuilt.co.uk)
14
Dialling a number from DIRECT memory
Pick up the handset and listen for dialling tone.
Press the DIRECT memory button (M1 or M2)
The number will be automatically dialled.
Storing a number in IN_DIRECT memory
Pick up the handset and press the STORE button.
Press the MEMORY button.
Enter the directory number under which the number is to be stored (0 9).
Enter the telephone number.
Press the STORE button to complete the process.
Enter details of the number you have stored, on the index card provided under the handset.
Dialling a number stored in IN-DIRECT memory.
Pick up the handset and listen for dialling tone.
Press the MEMORY button.
Enter the directory number under which the number is stored (0 9).
The number will be automatically dialled.
Telephone Number Index Card
Under the handset you will find an INDEX card on which you may record your own n
you have stored in memory.
The index card has a transparent cover, which may be removed by pushing it up or down and flexing it. The
card may then be filed in and the cover replaced.
Recall and Recall Time Setting
Some network services require the use of a Recall signal. This phone generates a Timed Break Recall (TBR).
The period of the Recall signal can be adjusted between 100mS and 300mS, by the switch at the rear of the
phone.
For use in the UK and most other European countries, the switch should be set to 100mS.
For use in France, the switch should be set to 300mS.
Press the R button when a recall is required.
In Case of Difficulty
If y
our telephone does not function properly, try the following suggestions before returning to your supplier.
Telephone does not ring for incoming calls
Check all plugs are correctly connected.
Check that the Ringer Volume Switch (at the rear of the phone) is set to the ON position.
Make sure you do not have too many devices connected to your telephone line (try unplugging all other devices
connected to you line, leaving only this phone connected).
No Dial Tone or Speech
Make sure that the telephone line cord and handset curly cord, are correctly connected and that all plugs have
been 'clicked' into place.
If possible, replace the phone with a known working phone to test the line and wall socket.
If you have other phones or devices connected to the same line disconnect all of these and try one at a time.
umber and the numbers
3
Publicidad
