QIMMIQ Sy 360 Manual Del Usuario página 22

Power off: Press and hold Power key for about 3 seconds and release it, accompanied
by a sound of the buzzer, the LCD screen will be shut down.
The device will be turned off automatically when it is in power saving mode for 3 minutes
(default setting of the system) without any operation, "Goodbye" will be displayed on the
LCD screen when it is turned off.
3. Charging the camera
An external chargeable lithium battery is used in this device, and its installation is as
shown in the figure below:
Open the cover of the battery:
Mount the battery as per the correct marks
for positive and negative poles;
Then put on the cover of the battery;
In power-off state, connect the device to the USB interface of the computer with a USB
cable for charging. The charging indicator will be in blue in charging. It takes at least 4
hours to complete charging due to current limit of the USB interface of the computer. After