QIMMIQ Sy 360 Manual Del Usuario página 33

- Do not put the battery in contact with metal objects (including coins) to avoid a short
circuit discharge or overheating.
- Do not heat the battery or throw it into fire to avoid a possible explosion.
- Remove the battery when the unit is stored for a long time.
- Do not store the battery in a high temperature environment.
- The use of the battery in an extremely cold environment causes a decrease of autonomy.
- Do not try to disassemble the battery by yourself.
- Please dispose of the battery properly according to regulations.
- The memory card used is a micro SD or micro SDHC.
- Please keep the memory clean and dry.
- When you insert the memory card into the camera, make sure it is well positioned. Do not
force memory card when you insert it.
- Please format the memory card before first use
- A photo or video taken with the product will be stored in the folder automatically created
on the memory card. Do not store any images or videos from other devices. They would
not be recognized.
- Direct editing of data in the memory card is not recommended. Copy the data in the disk
of your computer before editing.
- Please turn off the product before removing the memory card to avoid any damage
- Do not disconnect power or turn off the product during the firmware update process. You
could damage your camera permanently.
- When using an airplane, follow the rules specified by the airline.
- Due to manufacturing technology limitations, the LCD may have a few bright or dead