Kohler K-4737 Guia De Instalacion página 5

Bolt
Mounting
Plate
Washer
Threaded Inserts
3. Install the Mounting Plate
NOTE: Inspect the toilet mounting holes for threaded inserts.
Follow the steps applicable to your mounting hole type.
For Toilets with Threaded Inserts
Position the mounting plate over the mounting holes on the bowl.
Slide a washer onto each of the bolts (provided).
Position each washer with the offset hole toward you and the
forward tab pointing down. Insert a bolt through each washer, as
shown. The bolt will freely spin.
Insert each bolt through the mounting plate and into the threaded
inserts. Position the washers to rest in the grooves of the
mounting plate.
Loosely thread the bolts into the inserts. The nut must be loose
enough to allow the seat to be adjusted.
For All Other Installations
Position the mounting plate over the mounting holes on the bowl.
Position the washer with the offset hole toward you and the
forward tab pointing up. Insert the bolt through the washer, as
shown. The bolt will not spin.
Insert each bolt through the mounting plate and into the
mounting holes.
Position the washers to rest in the grooves of the mounting plate.
Kohler Co.
Bolt
Washer
Nut
All Other Installations
5
Mounting
Plate
1097712-2-B