Tools And Materials; Before You Begin - Kohler K-4737 Guia De Instalacion

Tools and Materials

Adjustable
Wrench
Plus:
Plastic Wrap
GFCI or RCD Electrical Outlet
Damp Wash Cloth (optional)
Grounding Adapter with Cover Screw (optional)

Before You Begin

WARNING: Risk of electric shock, fire, or personal injury.
This product must be grounded and connected only to a
dedicated, nominal 120 VAC, 60 Hz circuit protected by a
minimum 15 A Ground-Fault Circuit-Interrupter (GFCI) or
Residual Current Device (RCD).
WARNING: Risk of electric shock. Do not immerse or flush
the product with water.
NOTICE: Do not plug in the seat until instructed to do so. This will
avoid possible product malfunction.
NOTICE: Do not install this seat in a location where: (1) water
might be splashed on the product or (2) excessive moisture, high
humidity levels, or condensation are present. This will avoid
damage to the electronic components.
NOTICE: Do not use an extension cord with this product.
Observe all local plumbing, electrical, and building codes.
Only connect the seat to a cold water supply of drinking quality
water at a pressure of 20-80 psi (139-551 kPa).
1097712-2-B
Flat-Blade
Screwdriver
2 Kohler Co.