GPO BERMUDA Manual De Usario página 11

Vinyl Record Mode
1. Turn the volume control knob on the front of the unit
clockwise to turn the unit on
2. Turn the control knob on the front of the unit so that Turnta-
ble mode is selected. This will be confirmed by a red
indicator light on the unit's side panel.
3. Place a blank USB drive into the slot on the unit's side panel
RCA Audio Out
4. Place the desired record onto the turntable, and play as
described in the Turntable Mode section
5. Press the record button on the control panel to begin
recording. The record light on the side panel will illuminate to
indicate that you are now recording.
6. Press once to record the whole vinyl as one track, and press
twice to split the tracks.
RCA Audio Out
You can connect extra speakers to the GPO Bermuda using the
RCA audio cable provided. The relevant Audio Out slots are
located on the rear of the unit.
GPO_Bermuda_EU_Manual.indd 11
11
14/09/2016 12:29