Programming For Second Device - GE Universal RM24927 Instruccion Manual

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Programming For Second Device

If you have not programmed the
AUDIO•AUX button for audio components,
you can assign a second TV, DVD, CD play-
er, VCR, Satellite System, or Cable Box to it.
1. Manually turn on the device you wish to
control. Find the three digit code for the
device you wish to program in the code list.
2. Press and hold the
CODE SEARCH button
until the INDICATOR
LIGHT lights, then
release the CODE
SEARCH button.
3. Press and release
the AUX button (The
INDICATOR LIGHT
will blink then remain
lit.)
4. Enter the code
using the Number
Buttons. After your
code is entered, the
INDICATOR
LIGHT will turn off. If
the code is not valid,
the INDICATOR
LIGHT will blink.
Check the code list and
repeat process.
5. Aim the remote at
the device you wish to
control and press the
ON•OFF button. The
device should turn off.
6. With your device
on, press CHAN+
(CHANNEL UP) or
ON•OFF button. If the
device responds, no further programming is
required.
NOTE: If your device does not respond, try
all the codes for your brand. If the codes do
not work, or your brand is not listed, try the
Code Search method.
7. Enter your code and the type of device
you programmed here for easy reference.
SEARCH
1
4
7
CHAN +
TV
CD
11
CODE
INDICATOR
LIGHT
AUX
(BLINK)
2
3
5
6
(OFF)
8
9
0
ON•OFF
ON•OFF
OR
AUX CODE
VCR
CABLE
RCVR
LD
DBS
DVD

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Universal rm94927

Tabla de contenido