Programming For Tv - GE RM24925 Manual De Instrucciones

All manuals and user guides at all-guides.com

Programming For TV

Most GE, RCA and ProScan TVs will not
require programming. Check to see if your
TV responds to the remote before you begin
programming.
1. Manually turn on the TV. Find the three
digit code for your TV
in the code list below.
2. Press and hold the
CODE SEARCH but-
ton
until the INDICATOR
LIGHT lights, then
release the CODE
SEARCH button.
3. Press and release
the TV button (The
INDICATOR LIGHT
will blink then
remain lit.
4. Enter the code
using the Number
Buttons. After your
code is entered, the
INDICATOR LIGHT
will turn off. If the
code is not valid, the
INDICATOR LIGHT
will blink. Check the
code list and repeat
process.
5. Aim the remote at
your TV and press the
ON•OFF button. Your
TV should turn off.
NOTE: If your TV does not respond, try all
the codes for your brand. If the codes do
not work, or your brand is not listed, try the
Code Search method.
6. With your TV on, press CHAN+
(CHANNEL UP). If the TV responds, no
further programming is required.
7. Enter your code here for easy reference.
CODE
SEARCH
INDICATOR
LIGHT
TV
(BLINK)
1 2 3
4 5 6
(OFF)
7 8 9
0
ON•OFF
CHAN +
TV CODE
5