Turnstone Bivi Manual Del Usario página 7

4.
At each end of the Hoodie, rotate
the inside plastic clip 1/2 turn toward
the bottom of the end frame and 'hook'
on the bottom channel of the end
frame. DO NOT connect the outside
plastic clip until the Hoodie is fastened
to the rumble seat (in a later step).
NOTE: Make sure that plastic clips
are completely seated and
centered on the edges of
the frame's bottom channel.
4
INSIDE
PLASTIC CLIPS
VIEW FROM BOTTOM
DETAIL FROM ARROW
PLASTIC
CLIP
SOCK
FABRIC
FRAME
BOTTOM
CHANNEL
1
2
3
Page 7 of 17
939500562 Rev H