Advice On Disposal; After Operation; Cleaning And Maintenance - UFESA BV4635 Manual De Instrucciones

3
Put the adapter into the processed product and
switch the mixer on.
OPERATION WITH MIXING CUP
Hold the mixer in your hand all the time
during operation.
Mixing cup is intended for infant soups preparation,
milk shakes or pancake dough.
It has the label „500 ml max" on both sides, which
indicates the maximum level of product to fill the cup
and graphic scale to determine the volume 200 ml to
500 ml (according to the symbols in the drawing beside).
1
After moving the cover (like during assembling the
adapter) assemble the cup the following way: Insert
the mixing cup on the motor part so that the 3 buckles
visible at the bottom of the cup got into the nuts of the
motor casing.
2
Holding the motor casing handle turn the cup
clockwise direction until you feel the refusal.
You shall obtain the proper connection, when the
3 buckles get under the motor casing, and the fastener
on the cup rib move on the other side of the spherical
buckle on the motor casing.
3
Fill the cup with products and put the cover with
the doser on – you can add next products to the cup
during operation.

After operation

1
Switch the mixer off and unplug it.
Depending on assembled equipment:
2
Push the whisks or mixers out with a pushing button.
3
Disassemble the liquidizing disc from the whisk.
● Disassemble the mixing adapter or mixing cup in
reverse way to assembling it.
● Wind the power cord on the motor part and put the
last winding under the insert.

Cleaning and maintenance

Before cleaning and maintenance, make sure that the
plug is removed from the socket outlet.
● Clean the whisks and mixers with warm water with
cleaning agents.
● Clean the mixing adapter and mixing cup by mixing
clean, warm water (after plugging the mixer to mains
supply).
● Do not wash the mixing adapter or the mixing cup
in dishwasher.
● Dry the mixer equipment after cleaning and store in
F
dry place.
● Clean the motor base using a soft cloth and then
wipe it dry.

Advice on disposal

Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This product complies with EU Directive
2002/96/EC. The crossed wheelie bin
symbol shown on the appliance indicates that
when it comes to dispose of the product it
must not be included in with household refuse. It must
be taken to a special refuse collection point for electric
and electronic appliances or returned to the distributor
when purchasing a similar appliance. Under current
refuse disposal regulations, users who fail to take
discarded appliances to special refuse collection points
may be penalised. Correct disposal of discarded
appliances means that they can be recycled and
processed ecologically, helping the environment and
allowing materials used in the product to be reused. For
more information on available waste disposal schemes
contact your local refuse service or the shop where the
product was purchased. Manufacturers and importers
are responsible for ecological recycling, processing and
G
disposal of products, whether directly or via a public
system.
Your local town council can provide you with information
about how to dispose of obsolete appliances.
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the
product any time in order to adjust it to law regulations, norms,
directives, or due to construction, trade, aesthetic or other
reasons, without notifying in advance.