Operating The Washer - Kenmore 402.4903 Manual De Uso Y Cuidado

OPERATING THE WASHER
1.SORT LAUNDRY AND LOAD WASHER
Refer to page 15.
% ::z z [,t'} . ...................
START/PAUSE
2.ADD DETERGENT AND OTHER PRODUCTS
Open the dispenser drawer and add _ HE (High-Efficiency) detergent to the main wash
compartment in the dispenser drawer. Add bleach and fabric softener as desired. See pages
14 and 15 for important information on detergents and dispenser use.
3.TURN ON THE WASHER
Press the POWER button to turn ON the washer. The lights around the Cycle Selector Knob
will illuminate and a chime will sound, if turned ON. Refer to page 12.
4. SELECT A CYCLE
Turn the Cycle Selector Knob either direction to select the desired cycle. The preset Wash/
Rinse Temperature, Spin Speed, Soil Level, and Option settings for that cycle will be shown.
Refer to page 12.
POWER _ _ START/PAUSE
iwom,jwoq ...... ,
co_,/co,d _,osp,o I L,g,,,
5. SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed if desired. This can be done
using the cycle modifier buttons as shown on page 19 (Wash/Rinse, Spin Speed, Soil Level,
and Chime).
NOTE: To protect your fabrics, not all modifiers are available on all cycles.
6. SELECT CYCLE OPTIONS
Cycle options can also be added using the options buttons as shown on page 20 (My Cycle,
Control Lock, Delay Start, Clean Washer).
NOTE: Not all options are available on all cycles.
POWER
7. BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. Once the cycle has been started,
pressing the START/PAUSE again will pause the washer and retain the existing settings for
up to 4 minutes.
12
Kenmole-Washer-Ownels-Manual EN.indd 12 3/23/2010 3:12:23PM