Cycle Option Buttons; Delay Start; Special Functions; Control Lock - Kenmore 402.4903 Manual De Uso Y Cuidado

CYCLE OPTION BUTTONS
Your washing machine features several additional cycle options to
customize cycles to meet your individual needs.
1.Turn on the washer and turn the cycle selector knob to select
the desired cycle.
2. Use the cycle modifier buttons to adjust the settings for that
cycle.
3. Press the cycle option button(s) for the option(s) you would like
to add. The button will light when that option is selected.
If the selected option is not allowed for the selected cycle, the
chime will sound twice to inform you that it is not allowed.
4. Press the START/PAUSE button to start the cycle. The washer
will start automatically after a brief delay for locking the door.
NOTE: To protect your garments, not every option is available with
every cycle. See the CYCLE GUIDE on page 14 for details.
NOTE: If the START/PAUSE button is not pressed within 4
minutes, the control will shut off and the settings will be lost.
DELAY START
O nce you have selected the cycle and other
settings, press this button to delay the start of the
wash cycle. Each press of the button increases
DebJy Sl"®rt the delay time by one hour, for up to 19 hours.
Once the desired delay time is set, press the
START/PAUSE button to start the delay time.
SPECIAL FUNCTIONS
CONTROL LOCK
This function prevents children from playing with
your washer.
Confro_ Lock
Activating the Control Lock function
Press and hold the CONTROL LOCK button simultaneously for
approximately 3 seconds.
When you activate the Control Lock function, the door locks and
the "Control Lock" lamp illuminates.
,, If you press the START/PAUSE button after you have activated
the Control Lock function, none of the buttons will work except
for the POWER button.
,, If you press a button when the buttons are locked, the "Control
Lock" lamp blinks.
Pausing the Control Lock function
When the door is locked or the buttons are locked by the Control
Lock function, you can pause the Control Lock operation for 1
minute by pressing and holding the CONTROL LOCK button
simultaneously for approximately 3 seconds.
If you pause the Control Lock mode temporarily, the door lock is
released for 1 minute for user convenience. During this period,
the "Control Lock" lamp blinks.
If you open the door after the minute is over, an alarm sounds for
up to 2 minutes.
If you close the door within the 2 minutes, the door is locked
and the Control Lock function is reactivated. If you close the
door after the 2 minutes, the door is not locked automatically
and no alarm sounds.
Deactivating the Control Lock function
Press and hold both the CONTROL LOCK button simultaneously
for approximately 6 seconds.
When you deactivate the Control Lock function, the door is
unlocked and the "Control Lock" is turned off.
WARNING:
The Control Lock function prevents children or the infirm from
accidently operating the washer and injuring themselves.
If a child enters the washing machine, the child may become
trapped and suffocate.
CAUTION:
Once you have activated the Control Lock function, it continues
working even if the power is turned off.
Opening the door by force can result in injury due to damage to
the product.
NOTE: To add laundry after you have activated the Control Lock
function, you must first pause or deactivate the Control Lock
function.
NOTE: If you want to open the door of the washing machine when
the Control Lock function is activated:
,, Pause or deactivate the Control Lock function.
,, Turn the washing machine off and then on again.
19
Kenmole-Washer-Ownels-Manual EN.indd 19 3,'23,'2010 3:12:25PM