Publicidad
Idiomas disponibles
Idiomas disponibles
Hang hood from (4)Mountin_
(from parts bag).
Slide hood towards w alluntilmounting screws areen-
gaged innarrow endof(4)_.
Tighten m ounting
screws s ecurely.
CAUTION: D onot pushon fiReror fan blade!
Pushing onthefiRer o rfanbmade may cause them
tointerfere w ithether h oodparts.
KEYHOLE (4)
MOUNTING
SCREW (4)
2. Connect
Ductwork
to hood. Use Duct Tape to make
joints secure and air tight.
DUCT TAPE
DUCTWORK
@
3. Install 75 W Ma×imum
LiehL_ht Bulbs. Purchase bulbs lo-
cally. Gently squeeze L_qht Lens LeAs to remove and re-
place lens.
CAUTION:
Bulbs may be hot! Refer to bulb pack-
aging for further
information.
4. Turn on power at service panel, and test for proper
operation.
LIGHT LENS LEGS
75 W MAXIMUM LIGHT BULBS
¢e
3"
5.
6.
Replace Bottom
Cover.
Install filters.
Push filters up into recess at top of hood. Swing filters in
and pull down. Make sure that Tab on filter is toward out-
side and bottom of hood.
BOTTOM
COVER
11
PULL DOWN
SWING IN __h
PUSHIN
(_
TAB
Publicidad
