Publicidad
Idiomas disponibles
Idiomas disponibles
[_ON
BLOWER
V
L,GHT
ON
sPEEol
Speed
Infinite speed slide control controls blower speed and sound
levels.
Blower
Turns the blower "ON" and "OFF".
When the blower is turned "OFF", the speed control remains
at the preset speed. When the b!ower is turned on again, it will
return to the previously chosen setting.
Light
Turns the light "ON" and "OFF".
First position turns on both bulbs for normal lighting.
Second position turns off the left side bulb. If you want a night-
light feature, combine a 75 Watt bulb (on the left) and a 25
Watt bulb (on the right).
Third position turns both bulbs "OFF".
Maximum buib rating is 75 Watts. Do not install bulbs rated
higher than 75 Watts.
Heat Sentry TM
This hood is equipped with a Heat Sentry TMthermostat. This
device wilI turn ON or speed-up the blower if it senses exces-
sive heat above the cooking surface.
If the blower is not ON, or if it is running at LOW speed, the
Heat Sentry TMwill override the normal blower control and turn
the blower ON to HIGH speed.
The Heat Sentry TMalso has a Iound buzzer alarm to warn you
of dangerously
high temperatures
on the cooking surface.
The alarm will only sound if there is a dangerous heat build-
up over the range area.
IF THE ALARM SOUNDS,
SHUT OFF ALL HEAT ON THE
RANGE. The alarm buzzer will sound for 1 to 5 minutes after
the heat is turned OFF and will shut off automatically
(in 5
minutes or less) when the temperature
under to hood returns
to normal levels.
WARNING: To reduce the risk of electric shock,
disconnect from power supply before cleaning.
ABuminum mesh filters
Clean frequently using hot water and a mild detergent or in
your dishwasher. The aluminum mesh filters should be washed
approximately
every month depending
on the amount of us-
age. Wash more often if your cooking style generates greater
grease - like frying foods or wok cooking.
Painted hood surfaces
Wiping regularly with mild soap/detergent
and warm water
should protect painted hood surfaces. Be cautious about us-
ing "New and Improved"
cleaning agents. Your hood is in-
stalled over hot cooking equipment.
Most chemicals found in
cleaning agents react with heat to loosen paint.
Stainless
steem hood surfaces
Stainless steel hoods should be washed regularly with a clean
cloth, warm water and mild soap or dish detergent. Clean in
the direction of the polish lines. Rinse well with clear water
and wipe dry immediately. You may wish to apply light oil used
for furniture polishing to emphasize its bright finish.
Bmower assembmy
Blower assembly can be cleaned with a damp cloth and mild
detergent. Use care when cleaning blower wheels - they must
not become bent or misaligned.
DO NOTALLOW
WATER TO
ENTER MOTOR. Make sure all surfaces are completely dry
before re-installing filters and restoring power.
Motor is permanently
lubricated.
Do not oil or disassemble
motor.
:S
:S
O_
q_
q_
2
g-
3
Publicidad
