Great Plains Industries M-3295 Serie Manual Del Usuario página 5

SPECIFICATIONS
The M-3295 fuel pump is designed to safely trans-
fer diesel fuel. The pump is designed for permanent
mounting on vented storage tanks, either in-ground or
above-ground.
Performance
Pump Rate: Up to 113.5 LPM @ 60 Hz
(95 LPM @ 50 Hz)
Duty Cycle: 30 minutes ON, 30 minutes OFF
Dry Prime: 15 ft. (4.6 m) maximum
Discharge Lift: 10 ft. (3 m) maximum
Operating Temperature
-20° F to +125° F (-29° C to +52° C)
Operating Pressure
25 PSI
Electrical
Input: Factory set at 230 VAC, 60/50 Hz
Conduit: 1/2 inch -14
Current Draw: 4.9 amps (on 60 Hz) and 5.7 amps
(on 50 Hz) at full load on 230 VAC
Motor: 3/4 HP, 1725/1425 RPM induction
type with internal thermal protection
Mechanical Connections
Bung: 2-inch Male BSPT
Inlet: 1-1/4-inch Female BSPP
Outlet: 1-inch Female BSPP
Accessories
Hose: 1 in. x 12 ft. (3.7 m) Buna-N statically
grounded
Nozzle: 1 in. manual leaded spout or 1 in. auto-
matic diesel
Security: Nozzle can be padlocked
Ship Weight: 75 lbs. (34 kg)
SERVICE
In order to preserve the UL Listing of motor, return the
entire pump to the factory for motor repair or replace-
ment. If the motor is removed from the pump or serviced
outside the factory, the UL nameplate on the pump must
be removed or defaced to indicate loss of UL Listing.
This product has a 2 year limited warranty. For war-
ranty consideration, parts, or other service information,
please contact your local distributor. If you need further
assistance, contact the GPI Customer Service Depart-
ment in Wichita, Kansas, during normal business hours.
Tel: 316-686-7361
Fax: 316-686-6746
To obtain prompt, efficient service, always be prepared
with the following information:
1. The model number of your pump.
2. The manufacturing date code of your pump.
For the M-3295 series, the date code is located on the
motor nameplate.
For warranty work, always be prepared with your original
sales slip or other evidence of purchase date.
Please contact GPI before returning any pump. It may
be possible to diagnose the trouble and find a solution
with a telephone call. GPI can also inform you of any
special requirements you will need to follow for shipping.
CAUTION
Do not return the pump without authority from
the Customer Service Department. Due to strict
government regulations, GPI cannot accept pumps
unless they have been drained and cleaned.
5