Graco 2M19VIB Manual De Dueño página 3

Parent Unit
unit will be ready for use. Remove the battery door cover on the
Parent Unit with a key or flat blade screw driver. Remove the battery
pack from the packaging and plug into the back of the unit. Place
the battery pack into the recess and press the wire into the slot on
the side. Replace the battery door.
the proper orientation of the batteries.
may leak, damaging your unit.
adapter into the Nursery Unit.
be stored for an extended period of time.
Nursery Unit, then plug adapter into a standard wall outlet.
circumstances.
if the rechargeable battery is charged.
button on the side of the unit. The Parent Unit will automatically scan all of the available channels until it locks on to the
Nursery Unit. If you are still experiencing interference, press the channel button on the side of the Nursery Unit up to 6
times until a good channel is found.
Batteries should be disposed of properly
by recycling.
3
Plug in cord