Graco 2M19VIB Manual De Dueño página 4

Ocultar thumbs Ver también para 2M19VIB:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Parent Unit
to hear a continuous audible beep from the Parent Unit.
begin to hear the Parent Unit beep.
from green to blinking green. Additionally, a continuous audible beep will be generated to warn the user that the connec-
tion to the Nursery unit has been lost.
will stop.
1. For optimum operation, it is best to charge the batteries in the Parent Units for at least 16 hours prior to use. The rechargeable
power while the unit is charging for the first time.
Plug it into a working 120 volt AC outlet.
3. Aim the Nursery Unit toward your baby. Check that there are no walls or large objects that could block sound transmission.
hear a single audible beep.
monitor is now ready for use.
suspect they may have been damaged or have not been used for a long time.
1. If two adults are present, have one take the Parent Units to different locations, trying various volume settings, while the
other speaks into the Nursery Unit.
2. If only one adult is available, place a ticking clock, radio, or other sound-producing device near the Nursery Unit to test it.
3. When testing, keep the level of your child's sounds in mind, and adjust the volume accordingly.
4. If there is sound interference, switch the Nursery Unit and the Parent Units to the other channel setting.
4
Test the units if you

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2m20vib

Tabla de contenido