Using The Counter; Appendix; Error/Auto-Range Function; Interference - Calculated Industries Scale Master Classic 6020 Guia Del Usuario

Using the Counter

You can use the [Subtract/Count] key
to count items such as electrical outlets,
drains, etc.
Press [Mode] until you find the Count
mode. Then press the [Subtract/Count]
key to count the items.
You can use the [M1+] and [M2x]
memory keys to store or accumulate
the counts for two different items. After
you have a count value, press [M1+] or
[M2x] to store it.
A
PPENDIX

Error/Auto-Range Function

Error Message – Press [Reset] to clear to any errors.
Auto Range Function – When calculating large num-
bers, your answer will be displayed in the next
largest measurement unit (ex: 10,000 M will display
instead of 10,000,000 MM ).

Interference

Exposure to direct light or close proximity to cell
phones and other electronic devices may cause in-
terference with the Scale Master device and result in
erroneous measurements.

Automatic Shut-Off

The unit will shut itself off if it is not used for 5 min-
utes. Press any key to restore power. All
registers/settings remain intact.
13 – User's Guide