Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.800.561.8187
(Cont'd)
[RESET] + [M1+]
Clears the value stored in the
memory register.
M1+
[RESET] + [M2x]
Clears the value stored in the
memory register.
M2x
[RESET] + [RCL]
Clears values stored in memory
M1+
Converting Between Scales
The Scale Master Classic can automatically
convert values between scales. For example, 20
feet rolled in 1/16
"
scale will be converted to
10 feet in 1/8
"
scale. You may want to roll a
value in one scale and then add that exact value
(unconverted) to a value rolled in another scale.
1) Roll a value and press
[M1+]
[SCALE]
to change scales.
2) Roll another value and press
[M1+]
3) Press
to recall the combined total.
[RCL] [M1+]
Using the Counter
You can use the
[SUBTRACT/COUnT]
count items such as electrical outlets, drains, etc.
Press
[MODE]
until you find the "
mode. Then press the
[SUBTRACT/COUnT]
key to count the items.
You can use the
[M1+]
and
[M2x]
keys to store or accumulate the counts for two
different items. After you have a count value,
press
or
to store it.
[M1+]
[M2x]
8 – Scale Master
Classic
®
www.
.com
and
.
M2x
. Press
.
key to
"
count
memory
information@itm.com
Publicidad
Capítulos
Tabla de contenido
