How To Operate; Floor/Carpet Cleaning; Above Floor Cleaning - Dirt Devil m088160 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO OPERATE

HOSE ASSEMBLY
2.
1.
Insert the short end of the
Insert hose handle into the
hose onto the tool caddy
left side of the cleaner. Press
holder on the right side.
down firmly. Press hose into
top and sides of tool caddy.
TOOL STORAGE
1.
4.
c
Tip bottom of dirt container
Attach tools: (a) Slide the 2-in-1
into
cleaner
and
push
tool onto post on the back
forward. Dirt cup lid will snap
panel. (b) Slide the crevice
into handle.
tool into round slot on right
side of tool caddy. (c) Slide the
extension wand into round
slot on left side of tool caddy.
HANDLE RELEASE
CORD RELEASE
PEDAL
1.
1.
To release the handle, push
Use the cord guides to store
the handle release pedal
the cord out of the way while
located on the lower left side
vacuuming.
of the cleaner.
3.
Assemble dirt container lid to
the dirt cup.
ON/OFF PEDAL
1.
a
b
Plug cord into electrical outlet.
Turn cleaner on by depressing
foot pedal located on the back
left side of the cleaner.
FLOOR/CARPET
CLEANING
1.
a
Move the handle and adjust
it to the desired position for
(a) storing the upright, (b)
operating the cleaner, and (c)
de-press the handle release
pedal again to clean under
furniture.
7
CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner
is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on.
Cleaner must be in the upright position to lift the rotation brush off the carpet when cleaning above the floor.

ABOVE FLOOR CLEANING

1.
Cleaner must be in its upright
position. Remove lower hose
from the side of the cleaner
by twisting to the right and
then pull off.
4.
Choose any of the handy
accessories or use the hose
alone. Simply push the
attachment firmly onto the
end of the wand or hose
handle. To remove tool, twist
and pull apart gently.
b
c
HOW TO OPERATE: CONTINUED
2.
Remove the hose from the
tool caddy.
EXTENSION WAND
1.
If additional length is needed,
use the extension wand.
8
3.
Slide the tool hose into the
lower dirt hose with the notch
facing up. Push together and
twist to secure.
CARRY HANDLE
1.
Use the carry handle on the
back of the cleaner to move
the cleaner from room to
room.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido