AIPTEK PENCAM VGA+ Guia De Instalacion página 14

Using Digital Camera Plus Manager
Plug the larger end of the USB cable to the
USB port of your PC.
Click the "Digital Camera
Plus Manager" icon on the
Desktop to activate the program
where you can begin to use your
camera.
Go to "Start" --> "Program"
--> "Digital Camera Plus
Manager". And the program will
be activated.
Note: When the camera connects with a PC, it gets power from PC. If
there are no batteries in the camera, after the camera is unplugged from
PC, all data in the camera will be lost.
Connect the smaller end of the USB cable to the
USB port of your camera.