Self Timer - AIPTEK PENCAM VGA+ Guia De Instalacion

Self Timer

Press the mode button until
" " appears on the LCD. Then
press the shutter button will start
10-second self-timer countdown.
The camera will issue a short
beep every second and then a
longer beep, which indicates
that a picture has been taken.
Note: The self-timer can not be
activated when the memory
capacity is full.
Clear the last image
Press the mode button until "
" appears on LCD and then
press the shutter button, the
LCD will start blinking. Press the
shutter button again, a short
beep will be issued and the last
picture will be deleted.
Note: If the shutter button is not
pressed within 5 seconds, the
camera will go back to capacity
mode.
Modes Selecting
Press mode button to select
" "
" " will be displayed
Press the shutter button to
turn on self-timer mode
Press mode button to select
" "
" " will be displayed
Press the shutter button to
select " " mode
LCD will start blinking
Press the shutter button
again to clear the last
memory
Shutter button
Mode button
Shutter button
Mode button