Battery Installation; Battery Charge - Panasonic KX-TGA807EX Manual De Instalación

TGA807EX(ex).book Page 7 Tuesday, June 19, 2007 2:21 PM
Location
• For maximum distance and noise-free operation, place your base unit:
- away from electrical appliances such as TVs, radios, personal computers, or
other phones.
- in a convenient, high, and central location.

Battery installation

Important:
• Use only the supplied rechargeable batteries noted on page 4, 5.
• USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
• Ensure correct polarities (
S
• Wipe the battery ends ( ,
S T
• When installing the batteries, avoid touching the battery ends (
unit contacts.

Battery charge

Place the handset on the charger for about 8 hours before initial use.
Note:
• The handset display may show "Register!" when the handset is placed on
the charger if it is not registered to a base unit.
• If you fully charged the batteries, but the operating time seems to be short, wipe
the battery ends (S, T) and the unit contacts with a dry cloth.
Registering the handset to the KX-TG8070/KX-TG8090 base
unit
Make sure that the batteries are installed correctly.
1
Press and hold {x} on the base unit for about 5 seconds until a beep is heard.
• If all registered handsets start ringing, press {x} to stop, then repeat this
step.
• After a beep is heard, the rest of this procedure must be completed within
1 minute.
2
{MENU} (right soft key) i r i {OK}
3
{^}/{V}: "Registration" i {OK}
4
{^}/{V}: "Register Handset" i {OK}
5
{^}/{V}: Select a base unit number. i {OK}
• This number is used by the handset as a reference only.
• The registered base unit is indicated by "@".
6
"Enter PIN" is displayed. Enter the base unit PIN (default: "0000").
i {OK}
, ) when installing the batteries.
T
) with a dry cloth.
, ) or the
S T
7