marklin BB 15000 Serie Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Function
This locomotive has a built-in digital high-
efficiency propulsion and offers these features:
• Can be operated with conventional AC power
(no. 6646 or 6647 Transformer, 32 VA),
Märklin Delta, Märklin Digital or Märklin Systems.
This locomotive is not designed for operation
with locomotive controllers for other systems
(examples: DC power, pulse width control,
multi-train controls of other makes).
• Automatic recognition of the mode of operation.
• 80 Märklin Systems / Digital (5 Delta) addresses
can be set with coding switches.
• Maximum speed and acceleration / braking delay
can be changed (braking delay works only with
Märklin Delta, Digital or Märklin Systems).
• The headlights change over with the direction
of travel when operating the locomotive with
Märklin Systems or Digital or they can be turned
on and off when operating the locomotive with the
Delta Control 4 f (item no. 66045). The headlights
will vary in brightness with the speed of the loco-
motive when the latter is operated with AC power.
The headlights are off at all times when the loco-
motive is operated with the 6604 Delta Control.
The headlights are on at all times when the loco-
motive is operated with the 6607 Delta Station.
Only in Digital operation with the Control Unit /
Mobile Station / Central Station:
• Sound effect for a horn can be turned on.
• The delay set for the acceleration and braking can
be minimized (switching speeds).
The maintenance work necessary with normal
operation of this locomotive is described below. Ple-
ase see your authorized Märklin dealer for repairs or
spare parts.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Märklin have been installed in Märklin
products or where Märklin products have been
converted in such a way that the non-Märklin parts
or the conversion were causal to the defects and / or
damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation
of non-Märklin parts or the conversion in or of Mär-
klin products was not causal to the defects and / or
damage arising, is borne by the person and / or
company responsible for the installation and / or con-
version, or by the customer.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido