Glacier bay SP-4451 Guía De Uso Y Cuidado página 5

Installation - Surface Mounting Only
1a
Installing the bottom bracket
WARNING: If installing the cabinet on drywall or other
hollow wall applications, the bottom mounting bracket (F)
and top clips (II) must be fastened to studs, headers, or
other structural wall members. The included plastic wall
anchors are intended for use with solid wall applications
only (tile or concrete). DO NOT USE WITH DRYWALL OR
OTHER HOLLOW WALL APPLICATIONS.
□ Using a level and measuring tape, ensure the bottom
bracket (F) is level and positioned accordingly.
□ Mount the bottom bracket (F) to the wall using the 1.5 in.
Phillips head screws (GG). See the Warning regarding the
fastening of the bracket (F).
□ Carefully position the cabinet (C)
onto the bottom bracket (F).
GG
NOTE: The height of the bottom bracket (F)
should be a minimum of 2 in. above the faucet.
2a
Installing the top clips
□ Install the top clips (II) by inserting the rounded ends
into the rear top slot of the cabinet (C). See the Warning
regarding the fastening of top clips (II).
□ Slide one top clip (II) to the left and one to the right.
□ Mount the top clips (II) to the wall by installing two 1.5 in.
screws (GG) through the top clips to secure the cabinet.
F
5
II
C
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
GG II
C