Medion MD 82288 Manual Del Usuario página 67

environment. A container could fall over and the
liquid could impair electrical safety.

Keep the device away from moisture, spray and
drops of water. Avoid shocks, dust, heat and direct
solar radiation, in order to prevent operating faults.
The operating temperature is 5 to 40 °C.

Never open the casing. This would end any claims
under guarantee and possibly lead to the
destruction of the device.

Wait until the device has reached the temperature of
the surroundings after transportation. Moisture,
which can cause an electrical short-circuit, can form
because of condensation, in the case of great
variations in the temperature or moisture.

Do not place any objects on the device or exert any
pressure on the display. The display could break
otherwise. Do not touch the display with sharp
objects, in order to avoid damage.

The danger of injury will exist if the display has
broken. Pack the broken parts and send them to
your Service Center for correct disposal if this
happens. Wash your hands with soap after this,
because it cannot be excluded that chemicals could
have been discharged.

Only use the USB cable supplied with the device.

The device is only intended for connection to
computers with connection validation (Limited
Power Source in the sense of EN60950).
- 9 -
EN