Technical Specifications; Noise Conditions - Fox F20-140A Manual De Instrucciones

Engine power:
Voltage and frequency:
Speed without cutting:
Abrasive disc:
External diameter:
Bore diameter:
Capacity at 90° (with clamp)
Circle:
Rectangle:
Square:
Paking dimensions
Height:
Width:
Length:
Vibrations hand arm (with load):
Weight:
The noise emitted, measured in conformity with the standards EN 3744 and EN 11201 is:
- Sound pressure level
- Sound power level
- Uncertainty of measurement K = 3 dB
We recommend you to use ear protection devices.
The sources of the noise of the saw are: the electric engine and its ventilation system, the blade
and the material to be cut.
We advise you to control the engine, its ventilation system and the aspiration passages. As far
as the saw blade is concerned, it is preferable to use silenced type of blades and to keep them
in good conditions. We recommend to use the correct saw blade and to keep firmly the
workpiece to be cut. As far as the gears are concerned, you have only to check periodically their
consumption by verifying the play with the saw blade.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if
there is a connection between emission levels and exposure levels, the first ones cannot be
used to determine safely if other precautions are necessary. The factors that can influence the
actual exposure level of the operator include the exposure length, environment features and
other sources of noise, as for example the number of machines and operations present.
Besides, exposure levels can change from country to country. However, these instructions
enable the user of the machine to better evaluate the dangers and risks.

TECHNICAL SPECIFICATIONS

NOISE CONDITIONS

LpA = 94,3 dB(A)
LWA = 107,3 dB(A)
2000 W
230 V – 50 Hz
3000 RPM
355 mm
30 mm
127 mm
127 x 152 mm
127 x 127 mm
430 mm
340 mm
600 mm
2.26 m/sec2
18 kg
28