Set Up; Activate The Digital-To-Analog Converter Box; Initial Setup - Artec T3A Manual Del Usuario

Start

Set Up

Activate the Digital-to-Analog Converter Box

1. Follow the instructions (indicated in the "Connection Cable" section) to connect the
power supply and other required peripheral devices.
2. Make sure that the batteries have been properly installed in the remote control.
3. After the TV is on, press POWER on the remote control or POWER on the top of the
Digital-to-Analog Converter Box to turn on the Digital-to-Analog Converter Box.

Initial Setup

After the Digital-to-Analog Converter Box is turned on, it will automatically lead you to the
Install Guide.
1. Press (Next) buttons to start installation.
2. Press buttons to select Display Language and press
3. Press OK to start an automatic channel scan. Press
4. Press buttons to select Time Zone and press
5. This setting is completed, press OK to exit.
(Next) buttons when finished.
(Next) buttons.
8
(Next) buttons.