Advanced Operation; Menu Function Guide; Channel - Artec T3A Manual Del Usuario

Advanced Operation

Menu Function Guide

Press MENU on the remote control to enter the menu.
You can perform the following setup tasks after entering
the "MENU" :

CHANNEL

Channel Input
1. Select Channel Input from the CHANNEL and
press OK.
2. Use the buttons to select input according to
your personal requirement.
Channel Scan
1. Select Channel Scan from the
CHANNEL and press OK to start
channel scan.
Note:
If you want to re-scan channel when the
Lock System is set on the "On" mode,
then you have to input the previous Lock
Password number.
Channel Add
1. Select Channel Add from the CHANNEL
and press OK to star scan add channel.
9