Lock; Lock System; Set Password - Artec T3A Manual Del Usuario

Advanced Operation

LOCK

1. Select Lock and press OK.
2. Enter your Password number by pressing the
NUMBER buttons on the remote control.
Note:
The default code is "0000".

Lock System

1. Select Lock System from the LOCK and press OK.
2. Use the buttons to select "Off" or "On" according
to your personal requirement.

Set Password

1. Select Set Password from the LOCK and press OK.
2. Enter and re-enter again to confirm your new
Password by pressing the NUMBER buttons on the
remote control.
Block Channel
1. Select Block Channel from the LOCK and press OK.
2. Use the buttons to move the color block to define
certain programs you wish to Block or Unblock, press
OK.
13