Avery Dennison PATHFINDER 6140 Referencia Rápida página 4

U s i n g B l u e t o o t h ®
♦
Your 6140 printer with Bluetooth can be paired/connected with a
smart device. The exact pairing/connecting process may differ by
device; refer to your smart device manual for specific instructions.
♦
Turn your 6140 printer on before you pair/connect it with your smart
device.
♦
The 6140 printer is autom atically discoverable by your smart device.
♦
Once your smart device is connected to the 6140, the printer's
display shows the signal strength.
♦
You can press Connect on the 6140 printer to reestablish a
connection with the last known, connected smart device.
T r o u b l e s h o o t i n g
Problem
Printer does not print,
has voids, or is too light.
Printer does not feed.
Printer fails to respond.
Scanner does not scan a
bar code.
Printer does not connect
to the smart device
Note: For optimal printer performance regularly follow the Cleaning
& Maintenance section in your Equipment Manual.
4-EN
Solution
Use a fully-charged battery.
Correctly load supply.
Clean the printhead.
Completely close the supply cover.
Make sure your printer and smart device
are connected.
Use a fully-charged battery.
Correctly load supply.
Clear any jammed labels.
Use a fully-charged battery.
Correctly load supply.
Clear any jammed labels.
Clean the printhead.
Make sure your printer and smart device
are connected.
Alter the scan angle and distance.
Clean the scanner window.
Check bar code for voids.
Use a fully-charged battery.
Make sure the printer and smart device are
not too far apart (typically no more than 10
meters line of sight).
Make sure another smart device is not
already connected to the printer.
Make sure your Bluetooth feature on your
smart device is turned on.