Local Time Setting - TMI VD35 Operación Manual

1) Pull out the crown to second click (VD35) / first click (VD36)
2) Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the buttons.
* Dual minute hand moves and returns to where it was
3) Press button A or B to reset the dual time hands to "0" position.
* Button A : dual hour hand moves clockwise
* Button B : dual minute hand moves clockwise
* The dual time hands move quickly if the respective buttons are kept pressed.
4) Push the crown back in the normal position.
Note : The dual minute hand rotates one revolution at every quarter (15 minutes). There is no problem as
it is typical function of the movement.
1) Pull out the crown to second click (VD35) / first click (VD36) when the second hand is at the 12 o'clock
position.
2) Turn the crown to set the hour and minute hands. (make sure AM/PM is set correctly).
3) Push the crown back in the normal position in accordance with a time signal.
Note :
* The moment the date changes is midnight.
* When moving to a country or area in a different time zone, adjust the dual hour hand to that
country / area :
[ Quick set the dual time ]
1) Crown at normal position.
2) Adjust the time by pressing the button A or B.
Button A : - 1 hour / push
Button B : +1 hour / push
[ Precise adjustment of the dual time ]
1) Pull out the crown to second click (VD35) / first click (VD36) when the second hand is at the
12 o'clock position.
2) Adjust the time by pressing the button A or B.
Button A : -1 minute / push
Button B : +1 minute / push
3) Push the crown back in the normal position in accordance with a time signal.
Note : The dual minute hand rotates one revolution at every quarter (15 minutes). There is no problem as
it is typical function of the movement.
Operation Manual
VD35 / VD36

LOCAL TIME SETTING

DUAL TIME SETTING
English