Mopar 82212517 Manual Del Usuario página 12

12
9. Remove the instrument cluster to I/P screw (1) located
in the window switch cavity.
10. Using trim stick C­4755 or equivalent, gently pry the
edges of instrument cluster bezel (1) away from the
I/P to disengage the snap retainers.
11. Remove the instrument cluster bezel (1) from the I/P.
NOTE: Steering wheel removed for clarity.
12. Position the column tilt at the full­downward position.
13. Remove the two screws (4) attaching the upper
shroud (1) to the lower shroud (2). After removing
the screws, unclip the shrouds from each other by
applying hand pressure along the seams where the
shrouds connect on the sides, then remove the upper
shroud.
14. Remove the screw (3) attaching the lower shroud (2)
to the steering column (6). Remove the lower shroud
(2).