Intended Use; Technical Data - Scheppach LMB400 Traducción De Las Instrucciones Originales De Funcionamiento

Safety notices for Li-Ion batteries
• Do not open the battery. Risk of short-circuiting!
• Protect the battery from heat, e.g. from constant
sun exposure, and from fire, water and humidity.
Risk of explosion.
• When the battery has been damaged or it is
being used inappropriately, fumes can be re-
leased. Let fresh air in and consult a doctor if the
fumes cause you any problems. The fumes can
irritate the respiratory tract.
• Only use original batteries with the voltage
specified on the rating plate of your power tool.
If other batteries are used, e.g. imitations, recondi-
tioned batteries or products from third party manu-
facturers, there is a risk of personal injury as well
as property damage based on exploding batteries.
• The battery voltage must correspond with the
battery charging voltage of the charger. Other-
wise, there is a risk of fire and explosion.
• Charge the batteries only in chargers that have
been recommended by the manufacturer. There
is a risk of fire if a charger for a particular type of
battery is used for another type of battery.
The battery can be damaged by sharp objects
such as a nail or screwdriver or by external ap-
plication of force. The battery may short-circuit and
start burning, smoking, exploding or overheating.
Warning! This electric tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.

Intended use

This gardening machine is exclusively intended to
• to cut grass in a private setting
• in accordance with descriptions and safety no-
tices specified in these operating instructions.
The equipment may be used only for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator and not the manu-
facturer will be liable for any damage or injuries of any
kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
Remaining hazards
The machine has been built using modern technology
and in accordance with recognized safety rules.
Some hazards, however, may still remain.
• There is a risk of injury from rotating parts.
• There is a danger from items being ejected.
• Wear regulation safety gear such as safety boots
and tight work clothing.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
• Electrical hazards exist when unsuitable electric
connections are used.
• Although having regarded all considerable rules
there may still remain not obvious remaining hazrds.
• Minimize remaining hazards by following the in-
structions in "Safety Rules", "Use only as author-
ized" and in the entire operating manual.

Technical data

Nominal voltage
Type of battery
Cutting width
Cutting height
Grass box capacity
Idle speed
Weight (with battery)
Noise and vibration
The noise and vibration values were developed using
a standardised measuring process.
Sound pressure L
pA
Sound power L
wA
(measured)
Sound power L
wA
(guaranteed)
UncertaintyK
WA
Vibration a
h
Uncertainty K
Wear ear-muffs.
The impact of noise can cause damage to
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves
Assembly
Push bar mount assembly (Fig. 3)
Insert the push bar mount (8) into the guides in
•
the lawn mower casing.
Secure the push bar mount (8) with the mounting
screws (11).
Upper push bar assembly (Fig. 4)
Attach the upper push bar (1) to the push bar mount
•
(8) using mounting screw (12), washer (13) and
star knob nut (9).You can attach the upper push bar
(1) at three different heights. This depends on the
height of the user.
36 (2x18) V
4,0 Ah
400 mm
25 - 65 mm
40 l
3500 1/min
14,7 kg
84,3 dB(A)
92,82 dB(A)
96 dB(A)
2,13 / 2,5 dB(A)
<2,5 m/s²
1,5 m/s²
hearing..
17 І 64