Switch The Headset On And Off; Pair The Headset With Your Phone - Nokia HS-13W Guia Del Usuario

G e t s t a r t e d
2. Open the charger cover, and connect the lead from the charger to the
charger connector.
Charging is displayed briefly if the headset is switched on. The battery
charge indicator scrolls on the display until the battery is full. If the
battery is completely discharged, it may take a few minutes before the
indicator appears on the display.
You can use the headset while the charger is connected.

■ Switch the headset on and off

Press and hold the power key.
Bluetooth wireless technology is activated by default when the headset is
switched on for the first time.
Warning: Do not switch the device on when wireless use is
prohibited or when it may cause interference or danger.

■ Pair the headset with your phone

When you switch the headset on for the first time, you must pair it with
your mobile phone. Pairing is important, because each time you switch on
the headset, it automatically attempts to connect to the first device with
which you have paired.
Create a connection from your mobile phone to the headset using
Bluetooth wireless technology. Follow the instructions in the user guide
of your phone. The passcode of your headset is 0000.
13