ResMed Airmini Manual De Instrucciones página 6

1. Slide the AirMini into the mount.
2. Hold the mount at an angle and push it onto
the mattress module. Adjust the angle to fit
the mount in place.
3. Turn the mount clockwise until it locks into
place.
4. Lay the strap flat underneath the mattress.
Hook module
The hook module can be used to hang the
AirMini onto various locations such as a bed
rail, bedside table or airplane seat pocket. Refer
to illustration F on page 3.
1. Slide the AirMini into the mount.
2. Hold the mount at an angle and push it onto
the hook module. Adjust the angle to fit the
mount in place.
3. Turn the mount clockwise until it locks into
place.
4. Hang the hook onto a bed rail, bedside table
or airplane seat pocket.
Wall module
The wall module can be used to mount the
AirMini to a wall. Refer to illustration G on
page 4.
6