User Interface - AVM FRITZ!Powerline 546E Manual Del Usuario

Connecting Wireless LAN and Network Devices
With your wireless and network devices you can use FRITZ!Powerline 546E as an
access point to your home network and your Internet router.
This is how to connect your wireless LAN devices, like smartphones or laptops, which
support the fast connection method WPS, with FRITZ!Powerline 546:
1. Press the WLAN • WPS button on FRITZ!Powerline 546E for about 1 second until it
starts fl ashing.
2. Start WPS on your wireless LAN device within two minutes.
If your wireless LAN device does not support the quick
connection method WPS:
1. Remove FRITZ!Powerline 546E from the outlet
and take note of the network key printed on the
back of the device.
2. Start the wireless LAN software on your wireless
device and enter the network key there.
If you would like to use a wired network device:
 Connect your network device to one of the LAN
Uber Powerline anschließen
sockets on FRITZ!Powerline 546E using a LAN
FRITZ!Powerline 546E kann Netzwerkgeräte auch über
cable.
Powerline in das Heimnetz einbinden. Die Netzwerkge-
räte sind dann über die Stromleitung mit FRITZ!Powerline
546E verbunden.
10
FRITZ!Powerline 546E
Powerline Device Password:
ABCD -EFGH-IJKL-MNOP
WLAN Network Key
(WPA2/WPA):
3779 8981 1562 8981 1234
Powerline
bc : 05: 43 : 0e: f 9 : 31
MAC/AIN:
Button Assignments:
On/Off • briefly: socket on/off
WLAN • briefly: WLAN on/off • long: starting WPS
Powerline • briefly: Powerline an/aus • long: register
C031.452.00.000.001
Serial-No.:
.:
Part-No 2000 2573
230 V~; 50 Hz; Max. 10A
© AVM GmbH • www.avm.de
not
These values are examples. Do
adopt these values in your settings.

User Interface

Open the FRITZ!Powerline 546E user interface in your web browser by entering
 fritz.powerline, if FRITZ!Powerline 546E is connected with a FRITZ!Box.
 192.168.178.2, if FRITZ!Powerline 546E is not connected with a router yet.
 the
address>. The IP address is assigned by your Internet router as soon as one
<IP
or more FRITZ!Powerline 546E adapters are located in your home network.
In the user interface you can, for instance, configure settings for the socket,
switch the button LEDs on and off, change the access to the home network, or
perform a FRITZ!OS update.
Expanding an Ethernet Home Network
Here is how to use FRITZ!Powerline 546E as a LAN bridge in your Ethernet home network.
1. Start a web browser and enter fritz.powerline
FRITZ!Powerline 546E user interface opens.
2. Open the Access to the Home Network and click Change Connection Type.
3. Select LAN Bridge and click Next. A Wizard starts to guide you through the confi -
guration process.
4. Click Finish.
5. Connect your wireless LAN and network devices with FRITZ!Powerline 546E.
in the address line. The
11