Push-Button Panel; Economiser Adjustment Sse Model); Onpanel Replacement - Appian Nuova Simonelli Instrucciones De Manejo

1-04-2006 11:36 Pagina 35
sure is shown on the
auge.
MAX
MIN
Fig. 19
operation has been com-
tective metal sheet back
eplace the worktop grid
ATER ECONOMI-
DJUSTMENT
al V/ESSE model)
are fitted with a hot water
ed to adjust the delivery
ter and therefore, to opti-
ance.
r economiser, it is neces-
left-hand panel of the
as follows:
screws (Fig. 20);
All manuals and user guides at all-guides.com
• loosen the screw beside the steam nozzle A;
• press the knob B and remove the left-hand
panel.
B
A
• to adjust the temperature of the hot water
delivered from the nozzle, turn the register
knob CLOCKWISE / ANTICLOCKWISE to
INCREASE / REDUCE the temperature;
• when this operation is complete, fit the left-
hand panel back onto the machine.
5.4

PUSH-BUTTON PANEL

REPLACEMENT
For correct functioning of the machine, perso-
nalising each button panel card at time of
replacement is necessary; proceed as follows
on the selectors placed on the card (on the key
side).
Fig. 20
GROUPS sw1 sw1 sw1 sw1 sw1 sw1 sw1 sw1
Group 1 On Off Off Off On Off Off Off
Group 2 Off On Off Off Off On Off Off
Group 3 Off Off On Off Off Off On Off
Group 4 Off Off Off On Off Off Off On
Fig. 21
Fig. 22
35