Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch IXO Grass Shear Manual Original

OBJ_BUCH-2787-001.book Page 19 Monday, December 12, 2016 9:22 AM
Removing Blockages at the Blade
Never remove clippings while the blade is running and never hold the mate-
rial you are cutting while the blade is running. Let go of the On/Off switch 7
and press the locking switch 8 downward.
 Warning! The blade continues to move for a few seconds after the
screwdriver with grass shear adapter has been switched off.
Do not touch the moving blade. Wait until the blade is at standstill and then
remove the blockage.

Maintenance and Service

Maintenance and Cleaning

 Always wear safety gloves when you are doing maintenance or ser-
vice work.
 Set the rotational direction switch to the middle position.
 Before any maintenance or cleaning work, press the locking switch
downward and remove the grass shear adapter from the screwdriver.
 Keep the blade clean to ensure good, safe operation.
– Inspect the grass shear adapter 1 regularly for visible defects such as
loose fixings and worn or damaged components.
– After each work clean the grass shear adapter 1 with a paintbrush or a soft
brush and lubricate the blade 2 with the Bosch maintenance spray. Do not
use any solvents or polishes!
Accessories
Lubricant spray, 250 ml

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. Exploded views and infor-
mation on spare parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning our
products and their accessories.
Bosch Power Tools
English | 19
Article number
1 609 200 399
1 609 92A 28R | (12.12.16)