Blade Maintenance - Bosch ART ACCUTRIM Serie Instrucciones De Servicio

F016 L70 348 - GB Seite 5 Donnerstag, 10. November 2005 10:11 10
Maintenance
Before any work on the machine itself, re-
move battery from machine.
Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Regularly check for obvious defects such as loose
fixings, and worn or damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
If the trimmer should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer service agent
for Bosch garden products.
For all correspondence and spare parts orders, al-
ways include the 10-digit part number (TYP) from
the nameplate of the machine!

Blade Maintenance

D
Before any work on the machine itself, re-
move battery from machine.
To remove the worn blade 22 push in direction of the
arrow until it snaps off the pivot 21.
Clean the pivot 21 of any residual plastic/debris with
a sharp knife.
To refit the new blade 22 place the eyelet over the
pivot 21 and pull outwards until it snaps into place.
Note: Only use Bosch replacement blades. They
have been developed specially for improved cutting
performance. The use of other cutter blades will lead
to a deterioration in performance and possible dam-
age to the product.
19 • F016 L70 348 • TMS • 08.09.05
After Trimming/Storage
Stop and remove battery from product. En-
sure battery is removed before storage.
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially
from the ventilation slots 7.
Turn the machine on its side and clean the cutting
guard 10 inside. If grass cuttings are compacted, re-
move with a wooden or plastic implement.
Battery should be stored between 0 – 45 °C; incor-
rect storage could result in the battery being dam-
aged.
English - 5