Bissell LITTLE GREEN 1400 Serie Guia Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operations
cleaning with the Deep Stain tool
(select models)
1. Attach the Deep stain Tool to the handheld
cleaning hose.
2. Plug in the unit and press the power button
beneath the handle to turn it on.
3. set the tool directly on top of the carpet
before pulling the spray trigger to inject formula
deep into your carpet fibers. Always keep the
Deep Stain Tool in direct contact with carpeting
to avoid over-spraying.
4. Release the spray trigger and gently scrub
the stain.
5. To lift the stain away, apply downward
pressure on the tool and slowly pull it toward
you. Watch as powerful suction removes the
dirt and cleaning solution. Continue until no
more dirt can be removed.
6. As a final step, use "drying strokes" (by not
pressing the spray trigger) to remove as much
moisture as possible. Repeat this step as often
as necessary.
notE: When using bISSEll oxy boost
formula, cleaning continues for 6-8 hours
after application.
Tips
» Deep cleaning stairs and high-traffic areas on
a regular basis helps prolong carpet life.
» Check upholstery stuffing before cleaning.
Colored stuffing may bleed through the fabric
when it becomes wet.
» If a significant amount of water and solution
remains in the clean tank, your unit can be stored
with liquid in the clean tank.
www.bissell.com
7

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido