Troubleshooting - Bissell LITTLE GREEN 1400 Serie Guia Del Usuario

Troubleshooting

problem possible causes
spray nozzle clogged
Clean water/solution tank empty
Clean water/solution tank insert
Reduced
clogged
spray or
no spray
Pump needs priming
Tank release latch is not closed
properly
Poor tool position
Deep cleaner
Dirty water/collection tank is full
won't pick
Tool brush worn
up cleaning
solution
excess solution in vacuum flex
hose
incorrect Cleaning Formula
please do
not return
this product
to the store.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a bissell product.
for any questions or concerns, bISSEll is happy to
be of service. contact us directly at 1-800-237-7691.
WaRnInG
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Clean spray nozzle
Check/refill tank
Clean insert at bottom of clean water/
solution tank
Gently lift clean water/solution tank
while depressing the spray trigger
OR gently squeeze clean tank while
depressing spray trigger
lift up the tank release latch and press
down firmly to make sure it is in place
Reposition tool on surface, follow
recommended cleaning procedures
empty dirty water/collection tank
Replace with new brush
lift tool and point upwards to allow
water in hose to flow into the dirty
water/collection tank
Use bissell portable machine formulas
(with bissell boost if desired) only
www.bissell.com
9