CARE AND MAINTENANCE
To ensure optimum performance and maximum reliability of the device, we recommend:
▪
Dry the tank and unit with a towel. Do not wash the unit completely with water to prevent the risk of shock.
▪
Do not load the tank excessively; it could reduce the efficacy of the bath and damage the unit.
▪
Do not put very heavy or large objects in the bottom of the tank.
▪
Use chemical cleaning products compatible with the objects to be treated. Avoid corrosive solvents.
▪
When items (especially valuable items) are being cleaned for the first time, carry out a trial run first with
just one item. Ask the manufacturer what cleaning solution is recommended.
▪
After using the unit, clean the tank and the external body with a damp cloth. Always unplug the unit before
cleaning it.
10
When there is no dirt in the smoke, cleaning is done. If additional cleaning is
required, select the time again and repeat the previous steps.
When cleaning is completed, turn off the switch, remove the lid and retrieve
the items. Pour water out through the draining valve. Clean and dry the
tank. Close the draining valve.
Do not turn the unit without water in the tank.
Even though the unit is designed with multiple protections, if it is turned on for over 30
seconds without water in the tank, it may damage the unit or severely reduce the life of
the unit.
Do not turn the unit for extended time or continuously.
The unit is designed with overheat protection. If the unit has been running for 45
minutes, it is recommended to stop the unit for about 20 minutes to prolong the life of
the unit.
Do not keep water in the cleaning tank for a long time.
After cleaning is completed, open the drain valve to extract dirty water. Clean and dry
the tank. Close the draining valve.
Do not spray water over the housing.
Take care not to wet the keyboard.
Use a towel to wipe the tank and the housing.
Do not expose the unit under direct sunshine for a long time.
Keep the unit in a dry, cool and ventilated area.