Campbell Hausfeld FP260200 Instrucción De Instalación

Setup Like a Pro
1 Close pressure regulator, Close pressure regulator,
Turn ON Turn ON compressor compressor
and and Allow Allow tank to reach tank to reach
maximum pressure. maximum pressure.
2
Attach Attach air hose to regulator outlet. air hose to regulator outlet. Adjust
regulator knob to recommended tool / accessory regulator knob to recommended tool / accessory
TIP: TIP:
pressure. pressure. If you are unsure what pressure If you are unsure what pressure
to use, pressures between 60 psi and 100 psi are to use, pressures between 60 psi and 100 psi are
typical. typical.
Adjust
FP260200 — Oilless Air Compressor
Quick Connect Reference Chart Quick Connect Reference Chart
Use a wrench to tighten threads when connecting hose, coupler, and plug.
Compressor
Pressure Regulator
Knob
Tank Gauge
Regulator
Outlet
Recoil Air Hose
Replacement Parts Replacement Parts
Female Coupler
Part Number: MP333500AV
Universal Chuck Infl ation Needle
Part Number: HF238300AV Part Number: SV568200AV
Outlet Gauge
Universal Chuck
Male Plug
ON / OFF
Switch
Raft Nozzle Infl ation Needle
IMPORTANT: Drain tank after
Female Coupler
each use. After tank is drained,
tighten drain valve completely
to help eliminate air leaks.
Male Plug
Part Number: HF203300AV
Recoil Air Hose
Part Number: MP268100AV