Campbell Hausfeld FP260100 Guía De Armado

Setup Like a Pro
1 Close pressure regulator, Close pressure regulator, Turn
compressor and Allow compressor and Allow tank to reach
maximum pressure. maximum pressure.
2
Attach air hose to regulator outlet. Attach air hose to regulator outlet. Adjust
regulator knob to recommended tool / accessory regulator knob to recommended tool / accessory
pressure. pressure. TIP: TIP: If you are unsure what pressure If you are unsure what pressure
to use, pressures between 60 psi and 100 psi are to use, pressures between 60 psi and 100 psi are
typical. typical.
Turn ON ON
tank to reach
Adjust
FP260100 — Oilless Air Compressor
Quick Connect Reference Chart Quick Connect Reference Chart
Use a wrench to tighten threads when connecting hose, coupler, and plug.
Compressor
Pressure Regulator
Knob
Tank Gauge
Regulator
Outlet
Outlet Gauge
Recoil Air Hose
Replacement Parts Replacement Parts
Female Coupler
Part Number: MP333500AV
Universal Chuck Infl ation Needle
Part Number: HF238300AV Part Number: SV568200AV
ON / OFF Switch
Universal Chuck
Male Plug
Raft Nozzle Infl ation Needle
IMPORTANT: Drain tank after
Female Coupler
each use. After tank is drained,
tighten drain valve completely
to help eliminate air leaks.
Male Plug
Part Number: HF203300AV
Recoil Air Hose
Part Number: MP268100AV